Get Ad-Free Access: Just $39/year

The Best Full Exhausts for 2005-2013 C6 Corvettes

Best Full Exhausts for C6 Corvettes

These are the best exhausts for 2005-2013 C6 Corvettes. The installation of a custom exhaust provides a great way to enhance the C6’s naturally-aggressive exhaust tone, while potentially increasing overall horsepower as well.

Find Your Next Exhaust

We vetted the market so you don’t have to!

Our exhaust recommendations are weighted based on a combination of performance, build quality, and value for money.

Entry-Level

Priced under $1900.

Mid-Range

Priced $1900-2500.

High-End

Priced $2500+.

About Our Exhaust Recommendations

Founded in 2014, the CorvSport team has been ‘Vette obsessed’ for as long as we can remember. While we’ve spent nearly a decade writing about all things Corvette, we’ve been driving them for much longer than that!

When creating our Corvette mod lists, we focused on three areas:

  • Performance – Any exhaust worth having should be free of any unnecessary restrictions, thereby overall exhaust pressure, and enhancing the C6’s output.
  • Build quality – A good exhaust kit should showcase superior craftsmanship, free of lackluster welds, and other obvious structural defects.
  • Value for money – We are especially excited to recommend any exhaust that provides consumers with plenty of bang for their buck.

CorvSport is funded by our audience. Our recommendations and reviews may contain affiliate links that earn us a small commission if you make a purchase after clicking them. This is the primary way we fund our website and pay our review team (and comes at no additional cost to you). Where appropriate, we disclose our relationship with brands or manufacturers for transparency.

Best Entry-Level C6 Exhausts

Priced under $1900.

LG Motorsports Street Series Long Tube Headers and X-Pipe

LG Motorsports Street Series Long Tube Headers and X-Pipe

Price: $1346

Where to Buy: PFYC.com

Why?

The LG Motorsports Street Series exhaust kit can be purchased with, or without cats, and comes complete with all hardware required for seamless installation. Additionally, this particular exhaust kit has been designed free of any unnecessary restrictions, thereby streamlining exhaust discharge. In fact, according to LG Motorsports, the installation of this kit should yield average gains of approximately 25-30 RWHP.

Key Specs & Features

  • 25-30+ RWHP GAIN
  • LifeTime warranty
  • Full 2.5″ mid section
  • Connects to OE or OE replacement mufflers

Fitment

2005-2013 C6 Corvette

Stainless Works Long Tube Headers 2009-2013 C6 Corvette Base GS ZR1

Stainless Works Long Tube Headers 2009-2013 C6 Corvette Base GS ZR1

Price: $1857

Where to Buy: PFYC

Why?

The Stainless Works C6 Long Tube Header kit provides consumers with ample bang for their buck. Included in this kit are primaries, collectors, slip-fit pipes, and a 3” X-pipe, as well as all necessary hardware for installation. The Stainless Works exhaust kit can also be ordered in both cat-compliant, and cat-less configurations, providing consumers with options when determining which route to take.

Key Specs & Features

  • Choice of 1 7/8 inch or 2 inch primaries
  • Comes with complete mounting hardware
  • Choice of cat or catless configurations

Fitment

2009 – 2013 C6 Corvette base coupe and convertible Grand Sport/GS and also ZR1

Best Mid-Range C6 Exhausts

Priced $1900-2500.

aFe Power 48-34109-YN PFADT Series Header and X-Pipe

aFe Power 48-34109-YN PFADT Series Header and X-Pipe

Price: $1989

Where to Buy: Danaport

Why?

The aFe Power PFADT Header/Exhaust kit is designed to optimize the flow of spent combustion gasses, thereby reducing back pressure as a whole. This yields enhanced performance, which should equate to noticeable performance gains. The aFe Header/Exhaust kit is constructed of mandrel-bent 304 stainless steel, and features laser-cut header flanges for a leak-free seal.

Key Specs & Features

  • Constructed of 304 stainless steel
  • Laser Cut flanges
  • Available with or without catalytic converters
  • 16 gauge tubing

Fitment

Chevrolet Corvette (C6) 09-13 V8-6.2L (LS3)

American Racing 1 7/8 x 3 Headers w/ 3 x 3 Catted X-Pipe Chevrolet Corvette Z06 06-12

American Racing 1 7/8 x 3 Headers w/ 3 x 3 Catted X-Pipe Chevrolet Corvette Z06 06-12

Price: $2391

Where to Buy: Vivid Racing

Why?

The American Racing exhaust kit is constructed of premium-grade 304 stainless steel and features 1 ⅞” primaries, high-flow cats, and a 3” X-pipe. This kit requires no modification to install and comes complete with stainless band clamps, and Grade 8 hardware. As if this wasn’t enough, the American Racing exhaust kit also looks indisputably striking and comes backed by a lifetime warranty.

Key Specs & Features

  • Constructed of 304 stainless steel
  • Lifetime warranty
  • Grade 8 hardware
  • Heavy duty stainless band clamps

Fitment

2006-12 Corvette Z06

Best High-End C6 Exhausts

Priced over $2500.

2005-2013 C6 Corvette LG Motorsports Complete Exhaust Package LGSPGT4

2005-2013 C6 Corvette LG Motorsports Complete Exhaust Package LGSPGT4

Price: $2580

Where to Buy: Southern Car Parts

Why?

The LG Motorsports Complete Exhaust Package offers consumers everything they need to completely revamp their C6’s exhaust. Included in this package are headers, slip-pipes, and X-pipes, as well as all axle-back components. This package is intended to serve as a direct fit replacement for your C6’s factory exhaust, bolting in place without any additional modification.

Key Specs & Features

  • 304 Stainless alloy
  • Dyno tested
  • 32” long tubes

Fitment

2005 – 2013 C6 Corvette

C6/Z06 Corvette Race Headers Exhaust

C6/Z06 Corvette Race Headers Exhaust

Price: $3761

Where to Buy: American Racing Headers

Why?

American Racing Headers’ Corvette Race Header kit is constructed of 304 stainless steel and features 100-percent TIG-welded joints. This kit can be ordered in several different size configurations, to suit a consumer’s individual preferences. Additionally, the Corvette Race Header kit comes with all necessary clamps and hardware to facilitate streamlined installation.

Key Specs & Features

  • ⅜” thick flanges
  • Hand-ported TIG welded inlets
  • Optimized primary tube routing for superior fit and performance
  • Made entirely of 304 stainless steel

Fitment

2005-2013 C6 Z06